Some home plumbing maintenance tasks are best entrusted to experts – examining your sump pump in preparation for spring rains, for instance. Rather than trying to judge the health of your pump yourself, it’s wise to have a professional residential plumbing services professional do it for you, as we explain further below. First, however, let’s review why residential plumbing services install sump pumps in the first place.

The basic purpose of a sump pump is to gather and pump excess water it to a removed area away from buildings. Oftentimes, home plumbing pumps direct water to municipal storm drains. Typically, these pumps handle subterranean water; as such, they are common in locations where the local water table is higher than homes’ foundations. Such areas are especially prone to basement flooding during heavy spring rains.

Why should homeowners worry about standing water? Well, the first reason is health-related. Standing water fosters mildew and mold growth, which are known to cause health issues over time. Studies have discovered a connection between wet basements and respiratory problems including allergies and asthma. Moreover, people who are exposed to allergens in their childhoods are typically more sensitive to them as adults.

The second reason to be concerned about standing water is that it can easily bring about considerable structural damage to your home. Water is a key ingredient in nature’s recipe for rotting. Interior finishes, wood subflooring, and stored objects will decay if left in a soggy basement. Of course, from a day-to-day perspective, the best reason to remove excess water using a sump pump is that otherwise your basement will be unusable until the water naturally drains away after the storm.

To avoid having standing water destroying your basement, it’s best to arrange for a home plumbing guru to examine your sump pump prior to spring rains.

Here are some sump pump maintenance points to consider:

1. The flotation device located inside a pump can fail. This is key because the “float” determines when the this pump turns on.

2. Debris and algae can get stuck inside these pumps. This is not a superficial issue; a jammed sump pump is are more likely to overheat, which often leads to mechanical failure. To solve this problem, residential Plumber Currens Hill flush the whole sump pit as well as the pump’s tubes.

3. The backup pump may malfunction, if you even have one. These days, the more common backup is comprised of a set of standby batteries that are rigged to power the pump in emergencies. If your backup battery is not operational, you’re just asking for trouble during the next deluge.

4. Older sump pumps – those that are more than 10 years old – may suffer mechanical problems such as deteriorating motors or freezing of the impeller. All mechanical devices require a little attention now and then to function properly, and sump pumps are no example, as residential plumbers can tell you.

All of these failures are best corrected by expert, professional residential plumbers. Even if your sump pump seems to be working a-okay, remember to have it inspected annually, at the very least. Home plumbing experts can vouch for the fact that it’s better to pre-empt flooding issues by arranging regular pump inspections, rather than leaving the health of your pump to chance.


Leave a Reply

Your email address will not be published. Required fields are marked *